From f54ae07b83c60e643476652502e8d67497c15f98 Mon Sep 17 00:00:00 2001 From: peturparkur Date: Mon, 17 Jun 2024 19:11:12 +0100 Subject: [PATCH] move plugins into their own files --- init.lua | 338 +------------------------ lua/kickstart/plugins/autocomplete.lua | 110 ++++++++ lua/kickstart/plugins/mini.lua | 37 +++ lua/kickstart/plugins/telescope.lua | 111 ++++++++ lua/kickstart/plugins/tokyonight.lua | 17 ++ lua/kickstart/plugins/treesitter.lua | 32 +++ lua/kickstart/plugins/whichkey.lua | 37 +++ 7 files changed, 350 insertions(+), 332 deletions(-) create mode 100644 lua/kickstart/plugins/autocomplete.lua create mode 100644 lua/kickstart/plugins/mini.lua create mode 100644 lua/kickstart/plugins/telescope.lua create mode 100644 lua/kickstart/plugins/tokyonight.lua create mode 100644 lua/kickstart/plugins/treesitter.lua create mode 100644 lua/kickstart/plugins/whichkey.lua diff --git a/init.lua b/init.lua index 036eefb8..3bd66977 100644 --- a/init.lua +++ b/init.lua @@ -273,140 +273,9 @@ require('lazy').setup({ -- after the plugin has been loaded: -- config = function() ... end - { -- Useful plugin to show you pending keybinds. - 'folke/which-key.nvim', - event = 'VimEnter', -- Sets the loading event to 'VimEnter' - config = function() -- This is the function that runs, AFTER loading - require('which-key').setup() - - -- Document existing key chains - require('which-key').register { - ['c'] = { name = '[C]ode', _ = 'which_key_ignore' }, - ['d'] = { name = '[D]ocument', _ = 'which_key_ignore' }, - ['r'] = { name = '[R]ename', _ = 'which_key_ignore' }, - ['s'] = { name = '[S]earch', _ = 'which_key_ignore' }, - ['w'] = { name = '[W]orkspace', _ = 'which_key_ignore' }, - ['t'] = { name = '[T]oggle', _ = 'which_key_ignore' }, - ['h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' }, - } - -- visual mode - require('which-key').register({ - ['h'] = { 'Git [H]unk' }, - }, { mode = 'v' }) - end, - }, - - -- NOTE: Plugins can specify dependencies. - -- - -- The dependencies are proper plugin specifications as well - anything - -- you do for a plugin at the top level, you can do for a dependency. - -- - -- Use the `dependencies` key to specify the dependencies of a particular plugin + require 'kickstart.plugins.whichkey', - { -- Fuzzy Finder (files, lsp, etc) - 'nvim-telescope/telescope.nvim', - event = 'VimEnter', - branch = '0.1.x', - dependencies = { - 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for installation instructions - 'nvim-telescope/telescope-fzf-native.nvim', - - -- `build` is used to run some command when the plugin is installed/updated. - -- This is only run then, not every time Neovim starts up. - build = 'make', - - -- `cond` is a condition used to determine whether this plugin should be - -- installed and loaded. - cond = function() - return vim.fn.executable 'make' == 1 - end, - }, - { 'nvim-telescope/telescope-ui-select.nvim' }, - - -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, - }, - config = function() - -- Telescope is a fuzzy finder that comes with a lot of different things that - -- it can fuzzy find! It's more than just a "file finder", it can search - -- many different aspects of Neovim, your workspace, LSP, and more! - -- - -- The easiest way to use Telescope, is to start by doing something like: - -- :Telescope help_tags - -- - -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of `help_tags` options and - -- a corresponding preview of the help. - -- - -- Two important keymaps to use while in Telescope are: - -- - Insert mode: - -- - Normal mode: ? - -- - -- This opens a window that shows you all of the keymaps for the current - -- Telescope picker. This is really useful to discover what Telescope can - -- do as well as how to actually do it! - - -- [[ Configure Telescope ]] - -- See `:help telescope` and `:help telescope.setup()` - require('telescope').setup { - -- You can put your default mappings / updates / etc. in here - -- All the info you're looking for is in `:help telescope.setup()` - -- - -- defaults = { - -- mappings = { - -- i = { [''] = 'to_fuzzy_refine' }, - -- }, - -- }, - -- pickers = {} - extensions = { - ['ui-select'] = { - require('telescope.themes').get_dropdown(), - }, - }, - } - - -- Enable Telescope extensions if they are installed - pcall(require('telescope').load_extension, 'fzf') - pcall(require('telescope').load_extension, 'ui-select') - - -- See `:help telescope.builtin` - local builtin = require 'telescope.builtin' - vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) - vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) - vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) - vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) - vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) - vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) - vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) - vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) - - -- Slightly advanced example of overriding default behavior and theme - vim.keymap.set('n', '/', function() - -- You can pass additional configuration to Telescope to change the theme, layout, etc. - builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { - winblend = 10, - previewer = false, - }) - end, { desc = '[/] Fuzzily search in current buffer' }) - - -- It's also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set('n', 's/', function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, { desc = '[S]earch [/] in Open Files' }) - - -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', 'sn', function() - builtin.find_files { cwd = vim.fn.stdpath 'config' } - end, { desc = '[S]earch [N]eovim files' }) - end, - }, + require 'kickstart.plugins.telescope', { -- LSP Configuration & Plugins 'neovim/nvim-lspconfig', @@ -662,207 +531,12 @@ require('lazy').setup({ }, }, - { -- Autocompletion - 'hrsh7th/nvim-cmp', - event = 'InsertEnter', - dependencies = { - -- Snippet Engine & its associated nvim-cmp source - { - 'L3MON4D3/LuaSnip', - build = (function() - -- Build Step is needed for regex support in snippets. - -- This step is not supported in many windows environments. - -- Remove the below condition to re-enable on windows. - if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then - return - end - return 'make install_jsregexp' - end)(), - dependencies = { - -- `friendly-snippets` contains a variety of premade snippets. - -- See the README about individual language/framework/plugin snippets: - -- https://github.com/rafamadriz/friendly-snippets - -- { - -- 'rafamadriz/friendly-snippets', - -- config = function() - -- require('luasnip.loaders.from_vscode').lazy_load() - -- end, - -- }, - }, - }, - 'saadparwaiz1/cmp_luasnip', - - -- Adds other completion capabilities. - -- nvim-cmp does not ship with all sources by default. They are split - -- into multiple repos for maintenance purposes. - 'hrsh7th/cmp-nvim-lsp', - 'hrsh7th/cmp-path', - }, - config = function() - -- See `:help cmp` - local cmp = require 'cmp' - local luasnip = require 'luasnip' - luasnip.config.setup {} - - cmp.setup { - snippet = { - expand = function(args) - luasnip.lsp_expand(args.body) - end, - }, - completion = { completeopt = 'menu,menuone,noinsert' }, - - -- For an understanding of why these mappings were - -- chosen, you will need to read `:help ins-completion` - -- - -- No, but seriously. Please read `:help ins-completion`, it is really good! - mapping = cmp.mapping.preset.insert { - -- Select the [n]ext item - [''] = cmp.mapping.select_next_item(), - -- Select the [p]revious item - [''] = cmp.mapping.select_prev_item(), - - -- Scroll the documentation window [b]ack / [f]orward - [''] = cmp.mapping.scroll_docs(-4), - [''] = cmp.mapping.scroll_docs(4), - - -- Accept ([y]es) the completion. - -- This will auto-import if your LSP supports it. - -- This will expand snippets if the LSP sent a snippet. - [''] = cmp.mapping.confirm { select = true }, - - -- If you prefer more traditional completion keymaps, - -- you can uncomment the following lines - --[''] = cmp.mapping.confirm { select = true }, - --[''] = cmp.mapping.select_next_item(), - --[''] = cmp.mapping.select_prev_item(), - - -- Manually trigger a completion from nvim-cmp. - -- Generally you don't need this, because nvim-cmp will display - -- completions whenever it has completion options available. - [''] = cmp.mapping.complete {}, - - -- Think of as moving to the right of your snippet expansion. - -- So if you have a snippet that's like: - -- function $name($args) - -- $body - -- end - -- - -- will move you to the right of each of the expansion locations. - -- is similar, except moving you backwards. - [''] = cmp.mapping(function() - if luasnip.expand_or_locally_jumpable() then - luasnip.expand_or_jump() - end - end, { 'i', 's' }), - [''] = cmp.mapping(function() - if luasnip.locally_jumpable(-1) then - luasnip.jump(-1) - end - end, { 'i', 's' }), - - -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: - -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps - }, - sources = { - { name = 'nvim_lsp' }, - { name = 'luasnip' }, - { name = 'path' }, - }, - } - end, - }, - - { -- You can easily change to a different colorscheme. - -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is. - -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. - 'folke/tokyonight.nvim', - priority = 1000, -- Make sure to load this before all the other start plugins. - init = function() - -- Load the colorscheme here. - -- Like many other themes, this one has different styles, and you could load - -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. - vim.cmd.colorscheme 'tokyonight-night' - - -- You can configure highlights by doing something like: - vim.cmd.hi 'Comment gui=none' - end, - }, - + require 'kickstart.plugins.autocomplete', + require 'kickstart.plugins.tokyonight', -- Highlight todo, notes, etc in comments { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, - - { -- Collection of various small independent plugins/modules - 'echasnovski/mini.nvim', - config = function() - -- Better Around/Inside textobjects - -- - -- Examples: - -- - va) - [V]isually select [A]round [)]paren - -- - yinq - [Y]ank [I]nside [N]ext [']quote - -- - ci' - [C]hange [I]nside [']quote - require('mini.ai').setup { n_lines = 500 } - - -- Add/delete/replace surroundings (brackets, quotes, etc.) - -- - -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren - -- - sd' - [S]urround [D]elete [']quotes - -- - sr)' - [S]urround [R]eplace [)] ['] - require('mini.surround').setup() - - -- Simple and easy statusline. - -- You could remove this setup call if you don't like it, - -- and try some other statusline plugin - local statusline = require 'mini.statusline' - -- set use_icons to true if you have a Nerd Font - statusline.setup { use_icons = vim.g.have_nerd_font } - - -- You can configure sections in the statusline by overriding their - -- default behavior. For example, here we set the section for - -- cursor location to LINE:COLUMN - ---@diagnostic disable-next-line: duplicate-set-field - statusline.section_location = function() - return '%2l:%-2v' - end - - -- ... and there is more! - -- Check out: https://github.com/echasnovski/mini.nvim - end, - }, - { -- Highlight, edit, and navigate code - 'nvim-treesitter/nvim-treesitter', - build = ':TSUpdate', - opts = { - ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' }, - -- Autoinstall languages that are not installed - auto_install = true, - highlight = { - enable = true, - -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. - -- If you are experiencing weird indenting issues, add the language to - -- the list of additional_vim_regex_highlighting and disabled languages for indent. - additional_vim_regex_highlighting = { 'ruby' }, - }, - indent = { enable = true, disable = { 'ruby' } }, - }, - config = function(_, opts) - -- [[ Configure Treesitter ]] See `:help nvim-treesitter` - - -- Prefer git instead of curl in order to improve connectivity in some environments - require('nvim-treesitter.install').prefer_git = true - ---@diagnostic disable-next-line: missing-fields - require('nvim-treesitter.configs').setup(opts) - - -- There are additional nvim-treesitter modules that you can use to interact - -- with nvim-treesitter. You should go explore a few and see what interests you: - -- - -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` - -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context - -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects - end, - }, + require 'kickstart.plugins.mini', + require 'kickstart.plugins.treesitter', -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the -- init.lua. If you want these files, they are in the repository, so you can just download them and diff --git a/lua/kickstart/plugins/autocomplete.lua b/lua/kickstart/plugins/autocomplete.lua new file mode 100644 index 00000000..e9d05724 --- /dev/null +++ b/lua/kickstart/plugins/autocomplete.lua @@ -0,0 +1,110 @@ +return { -- Autocompletion + 'hrsh7th/nvim-cmp', + event = 'InsertEnter', + dependencies = { + -- Snippet Engine & its associated nvim-cmp source + { + 'L3MON4D3/LuaSnip', + build = (function() + -- Build Step is needed for regex support in snippets. + -- This step is not supported in many windows environments. + -- Remove the below condition to re-enable on windows. + if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then + return + end + return 'make install_jsregexp' + end)(), + dependencies = { + -- `friendly-snippets` contains a variety of premade snippets. + -- See the README about individual language/framework/plugin snippets: + -- https://github.com/rafamadriz/friendly-snippets + -- { + -- 'rafamadriz/friendly-snippets', + -- config = function() + -- require('luasnip.loaders.from_vscode').lazy_load() + -- end, + -- }, + }, + }, + 'saadparwaiz1/cmp_luasnip', + + -- Adds other completion capabilities. + -- nvim-cmp does not ship with all sources by default. They are split + -- into multiple repos for maintenance purposes. + 'hrsh7th/cmp-nvim-lsp', + 'hrsh7th/cmp-path', + }, + config = function() + -- See `:help cmp` + local cmp = require 'cmp' + local luasnip = require 'luasnip' + luasnip.config.setup {} + + cmp.setup { + snippet = { + expand = function(args) + luasnip.lsp_expand(args.body) + end, + }, + completion = { completeopt = 'menu,menuone,noinsert' }, + + -- For an understanding of why these mappings were + -- chosen, you will need to read `:help ins-completion` + -- + -- No, but seriously. Please read `:help ins-completion`, it is really good! + mapping = cmp.mapping.preset.insert { + -- Select the [n]ext item + [''] = cmp.mapping.select_next_item(), + -- Select the [p]revious item + [''] = cmp.mapping.select_prev_item(), + + -- Scroll the documentation window [b]ack / [f]orward + [''] = cmp.mapping.scroll_docs(-4), + [''] = cmp.mapping.scroll_docs(4), + + -- Accept ([y]es) the completion. + -- This will auto-import if your LSP supports it. + -- This will expand snippets if the LSP sent a snippet. + [''] = cmp.mapping.confirm { select = true }, + + -- If you prefer more traditional completion keymaps, + -- you can uncomment the following lines + --[''] = cmp.mapping.confirm { select = true }, + --[''] = cmp.mapping.select_next_item(), + --[''] = cmp.mapping.select_prev_item(), + + -- Manually trigger a completion from nvim-cmp. + -- Generally you don't need this, because nvim-cmp will display + -- completions whenever it has completion options available. + [''] = cmp.mapping.complete {}, + + -- Think of as moving to the right of your snippet expansion. + -- So if you have a snippet that's like: + -- function $name($args) + -- $body + -- end + -- + -- will move you to the right of each of the expansion locations. + -- is similar, except moving you backwards. + [''] = cmp.mapping(function() + if luasnip.expand_or_locally_jumpable() then + luasnip.expand_or_jump() + end + end, { 'i', 's' }), + [''] = cmp.mapping(function() + if luasnip.locally_jumpable(-1) then + luasnip.jump(-1) + end + end, { 'i', 's' }), + + -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: + -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps + }, + sources = { + { name = 'nvim_lsp' }, + { name = 'luasnip' }, + { name = 'path' }, + }, + } + end, +} \ No newline at end of file diff --git a/lua/kickstart/plugins/mini.lua b/lua/kickstart/plugins/mini.lua new file mode 100644 index 00000000..a7439e4b --- /dev/null +++ b/lua/kickstart/plugins/mini.lua @@ -0,0 +1,37 @@ +return { -- Collection of various small independent plugins/modules + 'echasnovski/mini.nvim', + config = function() + -- Better Around/Inside textobjects + -- + -- Examples: + -- - va) - [V]isually select [A]round [)]paren + -- - yinq - [Y]ank [I]nside [N]ext [']quote + -- - ci' - [C]hange [I]nside [']quote + require('mini.ai').setup { n_lines = 500 } + + -- Add/delete/replace surroundings (brackets, quotes, etc.) + -- + -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren + -- - sd' - [S]urround [D]elete [']quotes + -- - sr)' - [S]urround [R]eplace [)] ['] + require('mini.surround').setup() + + -- Simple and easy statusline. + -- You could remove this setup call if you don't like it, + -- and try some other statusline plugin + local statusline = require 'mini.statusline' + -- set use_icons to true if you have a Nerd Font + statusline.setup { use_icons = vim.g.have_nerd_font } + + -- You can configure sections in the statusline by overriding their + -- default behavior. For example, here we set the section for + -- cursor location to LINE:COLUMN + ---@diagnostic disable-next-line: duplicate-set-field + statusline.section_location = function() + return '%2l:%-2v' + end + + -- ... and there is more! + -- Check out: https://github.com/echasnovski/mini.nvim + end, +} \ No newline at end of file diff --git a/lua/kickstart/plugins/telescope.lua b/lua/kickstart/plugins/telescope.lua new file mode 100644 index 00000000..a2eba371 --- /dev/null +++ b/lua/kickstart/plugins/telescope.lua @@ -0,0 +1,111 @@ +-- NOTE: Plugins can specify dependencies. + -- + -- The dependencies are proper plugin specifications as well - anything + -- you do for a plugin at the top level, you can do for a dependency. + -- + -- Use the `dependencies` key to specify the dependencies of a particular plugin + +return { -- Fuzzy Finder (files, lsp, etc) + 'nvim-telescope/telescope.nvim', + event = 'VimEnter', + branch = '0.1.x', + dependencies = { + 'nvim-lua/plenary.nvim', + { -- If encountering errors, see telescope-fzf-native README for installation instructions + 'nvim-telescope/telescope-fzf-native.nvim', + + -- `build` is used to run some command when the plugin is installed/updated. + -- This is only run then, not every time Neovim starts up. + build = 'make', + + -- `cond` is a condition used to determine whether this plugin should be + -- installed and loaded. + cond = function() + return vim.fn.executable 'make' == 1 + end, + }, + { 'nvim-telescope/telescope-ui-select.nvim' }, + + -- Useful for getting pretty icons, but requires a Nerd Font. + { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, + }, + config = function() + -- Telescope is a fuzzy finder that comes with a lot of different things that + -- it can fuzzy find! It's more than just a "file finder", it can search + -- many different aspects of Neovim, your workspace, LSP, and more! + -- + -- The easiest way to use Telescope, is to start by doing something like: + -- :Telescope help_tags + -- + -- After running this command, a window will open up and you're able to + -- type in the prompt window. You'll see a list of `help_tags` options and + -- a corresponding preview of the help. + -- + -- Two important keymaps to use while in Telescope are: + -- - Insert mode: + -- - Normal mode: ? + -- + -- This opens a window that shows you all of the keymaps for the current + -- Telescope picker. This is really useful to discover what Telescope can + -- do as well as how to actually do it! + + -- [[ Configure Telescope ]] + -- See `:help telescope` and `:help telescope.setup()` + require('telescope').setup { + -- You can put your default mappings / updates / etc. in here + -- All the info you're looking for is in `:help telescope.setup()` + -- + -- defaults = { + -- mappings = { + -- i = { [''] = 'to_fuzzy_refine' }, + -- }, + -- }, + -- pickers = {} + extensions = { + ['ui-select'] = { + require('telescope.themes').get_dropdown(), + }, + }, + } + + -- Enable Telescope extensions if they are installed + pcall(require('telescope').load_extension, 'fzf') + pcall(require('telescope').load_extension, 'ui-select') + + -- See `:help telescope.builtin` + local builtin = require 'telescope.builtin' + vim.keymap.set('n', 'sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) + vim.keymap.set('n', 'sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) + vim.keymap.set('n', 'sf', builtin.find_files, { desc = '[S]earch [F]iles' }) + vim.keymap.set('n', 'ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) + vim.keymap.set('n', 'sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) + vim.keymap.set('n', 'sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) + vim.keymap.set('n', 'sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) + vim.keymap.set('n', 'sr', builtin.resume, { desc = '[S]earch [R]esume' }) + vim.keymap.set('n', 's.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) + vim.keymap.set('n', '', builtin.buffers, { desc = '[ ] Find existing buffers' }) + + -- Slightly advanced example of overriding default behavior and theme + vim.keymap.set('n', '/', function() + -- You can pass additional configuration to Telescope to change the theme, layout, etc. + builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { + winblend = 10, + previewer = false, + }) + end, { desc = '[/] Fuzzily search in current buffer' }) + + -- It's also possible to pass additional configuration options. + -- See `:help telescope.builtin.live_grep()` for information about particular keys + vim.keymap.set('n', 's/', function() + builtin.live_grep { + grep_open_files = true, + prompt_title = 'Live Grep in Open Files', + } + end, { desc = '[S]earch [/] in Open Files' }) + + -- Shortcut for searching your Neovim configuration files + vim.keymap.set('n', 'sn', function() + builtin.find_files { cwd = vim.fn.stdpath 'config' } + end, { desc = '[S]earch [N]eovim files' }) + end, +} \ No newline at end of file diff --git a/lua/kickstart/plugins/tokyonight.lua b/lua/kickstart/plugins/tokyonight.lua new file mode 100644 index 00000000..eb2e3af0 --- /dev/null +++ b/lua/kickstart/plugins/tokyonight.lua @@ -0,0 +1,17 @@ +return { -- You can easily change to a different colorscheme. + -- Change the name of the colorscheme plugin below, and then + -- change the command in the config to whatever the name of that colorscheme is. + -- + -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. + 'folke/tokyonight.nvim', + priority = 1000, -- Make sure to load this before all the other start plugins. + init = function() + -- Load the colorscheme here. + -- Like many other themes, this one has different styles, and you could load + -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. + vim.cmd.colorscheme 'tokyonight-night' + + -- You can configure highlights by doing something like: + vim.cmd.hi 'Comment gui=none' + end, +} \ No newline at end of file diff --git a/lua/kickstart/plugins/treesitter.lua b/lua/kickstart/plugins/treesitter.lua new file mode 100644 index 00000000..3cec8768 --- /dev/null +++ b/lua/kickstart/plugins/treesitter.lua @@ -0,0 +1,32 @@ +return { -- Highlight, edit, and navigate code + 'nvim-treesitter/nvim-treesitter', + build = ':TSUpdate', + opts = { + ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' }, + -- Autoinstall languages that are not installed + auto_install = true, + highlight = { + enable = true, + -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. + -- If you are experiencing weird indenting issues, add the language to + -- the list of additional_vim_regex_highlighting and disabled languages for indent. + additional_vim_regex_highlighting = { 'ruby' }, + }, + indent = { enable = true, disable = { 'ruby' } }, + }, + config = function(_, opts) + -- [[ Configure Treesitter ]] See `:help nvim-treesitter` + + -- Prefer git instead of curl in order to improve connectivity in some environments + require('nvim-treesitter.install').prefer_git = true + ---@diagnostic disable-next-line: missing-fields + require('nvim-treesitter.configs').setup(opts) + + -- There are additional nvim-treesitter modules that you can use to interact + -- with nvim-treesitter. You should go explore a few and see what interests you: + -- + -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` + -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context + -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects + end, +} \ No newline at end of file diff --git a/lua/kickstart/plugins/whichkey.lua b/lua/kickstart/plugins/whichkey.lua new file mode 100644 index 00000000..aa5f6bbc --- /dev/null +++ b/lua/kickstart/plugins/whichkey.lua @@ -0,0 +1,37 @@ +-- NOTE: Plugins can also be configured to run Lua code when they are loaded. + -- + -- This is often very useful to both group configuration, as well as handle + -- lazy loading plugins that don't need to be loaded immediately at startup. + -- + -- For example, in the following configuration, we use: + -- event = 'VimEnter' + -- + -- which loads which-key before all the UI elements are loaded. Events can be + -- normal autocommands events (`:help autocmd-events`). + -- + -- Then, because we use the `config` key, the configuration only runs + -- after the plugin has been loaded: + -- config = function() ... end + +return { -- Useful plugin to show you pending keybinds. + 'folke/which-key.nvim', + event = 'VimEnter', -- Sets the loading event to 'VimEnter' + config = function() -- This is the function that runs, AFTER loading + require('which-key').setup() + + -- Document existing key chains + require('which-key').register { + ['c'] = { name = '[C]ode', _ = 'which_key_ignore' }, + ['d'] = { name = '[D]ocument', _ = 'which_key_ignore' }, + ['r'] = { name = '[R]ename', _ = 'which_key_ignore' }, + ['s'] = { name = '[S]earch', _ = 'which_key_ignore' }, + ['w'] = { name = '[W]orkspace', _ = 'which_key_ignore' }, + ['t'] = { name = '[T]oggle', _ = 'which_key_ignore' }, + ['h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' }, + } + -- visual mode + require('which-key').register({ + ['h'] = { 'Git [H]unk' }, + }, { mode = 'v' }) + end, +} \ No newline at end of file