@ -82,7 +82,7 @@ yt-dlp is a [youtube-dl](https://github.com/ytdl-org/youtube-dl) fork based on t
* **[Format Sorting](#sorting-formats)**: The default format sorting options have been changed so that higher resolution and better codecs will be now preferred instead of simply using larger bitrate. Furthermore, you can now specify the sort order using `-S`. This allows for much easier format selection than what is possible by simply using `--format` ([examples](#format-selection-examples))
* **Merged with animelover1984/youtube-dl**: You get most of the features and improvements from [animelover1984/youtube-dl](https://github.com/animelover1984/youtube-dl) including `--write-comments`, `BiliBiliSearch`, `BilibiliChannel`, Embedding thumbnail in mp4/ogg/opus, playlist infojson etc. Note that the NicoNico livestreams are not available. See [#31](https://github.com/yt-dlp/yt-dlp/pull/31) for details.
* **Merged with animelover1984/youtube-dl**: You get most of the features and improvements from [animelover1984/youtube-dl](https://github.com/animelover1984/youtube-dl) including `--write-comments`, `BiliBiliSearch`, `BilibiliChannel`, Embedding thumbnail in mp4/ogg/opus, playlist infojson etc. Note that NicoNico livestreams are not available. See [#31](https://github.com/yt-dlp/yt-dlp/pull/31) for details.
@ -184,7 +184,7 @@ You can use `yt-dlp -U` to update if you are [using the release binaries](#relea
If you [installed with PIP](https://github.com/yt-dlp/yt-dlp/wiki/Installation#with-pip), simply re-run the same command that was used to install the program
For other third-party package managers, see [the wiki](https://github.com/yt-dlp/yt-dlp/wiki/Installation) or refer their documentation
For other third-party package managers, see [the wiki](https://github.com/yt-dlp/yt-dlp/wiki/Installation#third-party-package-managers) or refer their documentation
<!-- MANPAGE: BEGIN EXCLUDED SECTION -->
@ -222,7 +222,7 @@ File|Description
<!-- MANPAGE: END EXCLUDED SECTION -->
Note: The manpages, shell completion files etc. are available in the [source tarball](https://github.com/yt-dlp/yt-dlp/releases/latest/download/yt-dlp.tar.gz)
**Note**: The manpages, shell completion files etc. are available in the [source tarball](https://github.com/yt-dlp/yt-dlp/releases/latest/download/yt-dlp.tar.gz)
## DEPENDENCIES
Python versions 3.7+ (CPython and PyPy) are supported. Other versions and implementations may or may not work correctly.
@ -238,8 +238,9 @@ While all the other dependencies are optional, `ffmpeg` and `ffprobe` are highly
* [**ffmpeg** and **ffprobe**](https://www.ffmpeg.org) - Required for [merging separate video and audio files](#format-selection) as well as for various [post-processing](#post-processing-options) tasks. License [depends on the build](https://www.ffmpeg.org/legal.html)
<!-- TODO: ffmpeg has merged this patch. Remove this note once there is new release -->
**Note**: There are some regressions in newer ffmpeg versions that causes various issues when used alongside yt-dlp. Since ffmpeg is such an important dependency, we provide [custom builds](https://github.com/yt-dlp/FFmpeg-Builds#ffmpeg-static-auto-builds) with patches for these issues at [yt-dlp/FFmpeg-Builds](https://github.com/yt-dlp/FFmpeg-Builds). See [the readme](https://github.com/yt-dlp/FFmpeg-Builds#patches-applied) for details on the specific issues solved by these builds
There are bugs in ffmpeg that causes various issues when used alongside yt-dlp. Since ffmpeg is such an important dependency, we provide [custom builds](https://github.com/yt-dlp/FFmpeg-Builds#ffmpeg-static-auto-builds) with patches for some of these issues at [yt-dlp/FFmpeg-Builds](https://github.com/yt-dlp/FFmpeg-Builds). See [the readme](https://github.com/yt-dlp/FFmpeg-Builds#patches-applied) for details on the specific issues solved by these builds
**Important**: What you need is ffmpeg *binary*, **NOT** [the python package of the same name](https://pypi.org/project/ffmpeg)
@ -286,7 +287,7 @@ On some systems, you may need to use `py` or `python` instead of `python3`.
`pyinst.py` accepts any arguments that can be passed to `pyinstaller`, such as `--onefile/-F` or `--onedir/-D`, which is further [documented here](https://pyinstaller.org/en/stable/usage.html#what-to-generate).
Note that pyinstaller with versions below 4.4 [do not support](https://github.com/pyinstaller/pyinstaller#requirements-and-tested-platforms) Python installed from the Windows store without using a virtual environment.
**Note**: Pyinstaller versions below 4.4 [do not support](https://github.com/pyinstaller/pyinstaller#requirements-and-tested-platforms) Python installed from the Windows store without using a virtual environment.
**Important**: Running `pyinstaller` directly **without** using `pyinst.py` is **not** officially supported. This may or may not work correctly.
@ -455,7 +456,9 @@ You can also fork the project on GitHub and run your fork's [build workflow](.gi
--date DATE Download only videos uploaded on this date.
The date can be "YYYYMMDD" or in the format
[now|today|yesterday][-N[day|week|month|year]].
E.g. --date today-2weeks
E.g. "--date today-2weeks" downloads
only videos uploaded on the same day two
weeks ago
--datebefore DATE Download only videos uploaded on or before
this date. The date formats accepted is the
same as --date
@ -532,8 +535,8 @@ You can also fork the project on GitHub and run your fork's [build workflow](.gi
linear=1::2 --retry-sleep fragment:exp=1:20
--skip-unavailable-fragments Skip unavailable fragments for DASH,
hlsnative and ISM downloads (default)
(Alias: --no-abort-on-unavailable-fragment)
--abort-on-unavailable-fragment
(Alias: --no-abort-on-unavailable-fragments)
--abort-on-unavailable-fragments
Abort download if a fragment is unavailable
(Alias: --no-skip-unavailable-fragments)
--keep-fragments Keep downloaded fragments on disk after
@ -1000,9 +1003,9 @@ You can also fork the project on GitHub and run your fork's [build workflow](.gi
additional field "filepath" that contains
the final path of the downloaded file is
also available, and if no fields are passed,
%(filepath)q is appended to the end of the
command. This option can be used multiple
times
%(filepath,_filename|)q is appended to the
end of the command. This option can be used
multiple times
--no-exec Remove any previously defined --exec
--convert-subs FORMAT Convert the subtitles to another format
(currently supported: ass, lrc, srt, vtt)
@ -1149,7 +1152,7 @@ E.g. with the following configuration file yt-dlp will always extract the audio,
-o ~/YouTube/%(title)s.%(ext)s
```
Note that options in configuration file are just the same options aka switches used in regular command line calls; thus there **must be no whitespace** after `-` or `--`, e.g. `-o` or `--proxy` but not `- o` or `-- proxy`. They must also be quoted when necessary as-if it were a UNIX shell.
**Note**: Options in configuration file are just the same options aka switches used in regular command line calls; thus there **must be no whitespace** after `-` or `--`, e.g. `-o` or `--proxy` but not `- o` or `-- proxy`. They must also be quoted when necessary as-if it were a UNIX shell.
You can use `--ignore-config` if you want to disable all configuration files for a particular yt-dlp run. If `--ignore-config` is found inside any configuration file, no further configuration will be loaded. For example, having the option in the portable configuration file prevents loading of home, user, and system configurations. Additionally, (for backward compatibility) if `--ignore-config` is found inside the system configuration file, the user configuration is not loaded.
@ -1225,7 +1228,7 @@ Additionally, you can set different output templates for the various metadata fi
<aid="outtmpl-postprocess-note"></a>
Note: Due to post-processing (i.e. merging etc.), the actual output filename might differ. Use `--print after_move:filepath` to get the name after all post-processing is complete.
**Note**: Due to post-processing (i.e. merging etc.), the actual output filename might differ. Use `--print after_move:filepath` to get the name after all post-processing is complete.
The available fields are:
@ -1346,7 +1349,7 @@ Available only in `--sponsorblock-chapter-title`:
Each aforementioned sequence when referenced in an output template will be replaced by the actual value corresponding to the sequence name. E.g. for `-o %(title)s-%(id)s.%(ext)s` and an mp4 video with title `yt-dlp test video` and id `BaW_jenozKc`, this will result in a `yt-dlp test video-BaW_jenozKc.mp4` file created in the current directory.
Note that some of the sequences are not guaranteed to be present since they depend on the metadata obtained by a particular extractor. Such sequences will be replaced with placeholder value provided with `--output-na-placeholder` (`NA` by default).
**Note**: Some of the sequences are not guaranteed to be present since they depend on the metadata obtained by a particular extractor. Such sequences will be replaced with placeholder value provided with `--output-na-placeholder` (`NA` by default).
**Tip**: Look at the `-j` output to identify which fields are available for the particular URL
@ -1487,7 +1490,7 @@ Also filtering work for comparisons `=` (equals), `^=` (starts with), `$=` (ends
Any string comparison may be prefixed with negation `!` in order to produce an opposite comparison, e.g. `!*=` (does not contain). The comparand of a string comparison needs to be quoted with either double or single quotes if it contains spaces or special characters other than `._-`.
Note that none of the aforementioned meta fields are guaranteed to be present since this solely depends on the metadata obtained by particular extractor, i.e. the metadata offered by the website. Any other field made available by the extractor can also be used for filtering.
**Note**: None of the aforementioned meta fields are guaranteed to be present since this solely depends on the metadata obtained by particular extractor, i.e. the metadata offered by the website. Any other field made available by the extractor can also be used for filtering.
Formats for which the value is not known are excluded unless you put a question mark (`?`) after the operator. You can combine format filters, so `-f "[height<=?720][tbr>500]"` selects up to 720p videos (or videos where the height is not known) with a bitrate of at least 500 KBit/s. You can also use the filters with `all` to download all formats that satisfy the filter, e.g. `-f "all[vcodec=none]"` selects all audio-only formats.
@ -1740,7 +1743,7 @@ Some extractors accept additional arguments which can be passed using `--extract
The following extractors use this feature:
#### youtube
* `lang`: Language code to prefer translated metadata of this language (case-sensitive). By default, the video primary language metadata is preferred, with a fallback to `en` translated. See [youtube.py](https://github.com/yt-dlp/yt-dlp/blob/c26f9b991a0681fd3ea548d535919cec1fbbd430/yt_dlp/extractor/youtube.py#L381-L390) for list of supported content language codes
* `lang`: Prefer translated metadata (`title`, `description` etc) of this language code (case-sensitive). By default, the video primary language metadata is preferred, with a fallback to `en` translated. See [youtube.py](https://github.com/yt-dlp/yt-dlp/blob/c26f9b991a0681fd3ea548d535919cec1fbbd430/yt_dlp/extractor/youtube.py#L381-L390) for list of supported content language codes
* `skip`: One or more of `hls`, `dash` or `translated_subs` to skip extraction of the m3u8 manifests, dash manifests and [auto-translated subtitles](https://github.com/yt-dlp/yt-dlp/issues/4090#issuecomment-1158102032) respectively
* `player_client`: Clients to extract video data from. The main clients are `web`, `android` and `ios` with variants `_music`, `_embedded`, `_embedscreen`, `_creator` (e.g. `web_embedded`); and `mweb` and `tv_embedded` (agegate bypass) with no variants. By default, `android,web` is used, but `tv_embedded` and `creator` variants are added as required for age-gated videos. Similarly, the music variants are added for `music.youtube.com` urls. You can use `all` to use all the clients, and `default` for the default clients.
* `player_skip`: Skip some network requests that are generally needed for robust extraction. One or more of `configs` (skip client configs), `webpage` (skip initial webpage), `js` (skip js player). While these options can help reduce the number of requests needed or avoid some rate-limiting, they could cause some issues. See [#860](https://github.com/yt-dlp/yt-dlp/pull/860) for more details
@ -1794,7 +1797,7 @@ The following extractors use this feature:
#### twitter
* `force_graphql`: Force usage of the GraphQL API. By default it will only be used if login cookies are provided
NOTE: These options may be changed/removed in the future without concern for backward compatibility
**Note**: These options may be changed/removed in the future without concern for backward compatibility
<!-- MANPAGE: MOVE "INSTALLATION" SECTION HERE -->
@ -1844,26 +1847,25 @@ Plugins can be installed using various methods and locations.
3. **pip and other locations in `PYTHONPATH`**
* Plugin packages can be installed and managed using `pip`. See [yt-dlp-sample-plugins](https://github.com/yt-dlp/yt-dlp-sample-plugins) for an example.
* Note: plugin files between plugin packages installed with pip must have unique filenames
* Note: plugin files between plugin packages installed with pip must have unique filenames.
* Any path in `PYTHONPATH` is searched in for the `yt_dlp_plugins` namespace folder.
* Note: This does not apply for Pyinstaller/py2exe builds.
.zip, .egg and .whl archives containing a `yt_dlp_plugins` namespace folder in their root are also supported. These can be placed in the same locations `yt_dlp_plugins` namespace folders can be found.
- e.g. `${XDG_CONFIG_HOME}/yt-dlp/plugins/mypluginpkg.zip` where `mypluginpkg.zip` contains `yt_dlp_plugins/<type>/myplugin.py`
`.zip`, `.egg` and `.whl` archives containing a `yt_dlp_plugins` namespace folder in their root are also supported as plugin packages.
* e.g. `${XDG_CONFIG_HOME}/yt-dlp/plugins/mypluginpkg.zip` where `mypluginpkg.zip` contains `yt_dlp_plugins/<type>/myplugin.py`
Run yt-dlp with `--verbose`/`-v` to check if the plugin has been loaded.
Run yt-dlp with `--verbose` to check if the plugin has been loaded.
## Developing Plugins
See [yt-dlp-sample-plugins](https://github.com/yt-dlp/yt-dlp-sample-plugins) for a sample plugin package with instructions on how to set up an environment for plugin development.
See the [yt-dlp-sample-plugins](https://github.com/yt-dlp/yt-dlp-sample-plugins) repo for a template plugin package and the [Plugin Development](https://github.com/yt-dlp/yt-dlp/wiki/Plugin-Development) section of the wiki for a plugin development guide.
All public classes with a name ending in `IE`/`PP` are imported from each file for extractors and postprocessors repectively. This respects underscore prefix (e.g. `_MyBasePluginIE` is private) and `__all__`. Modules can similarly be excluded by prefixing the module name with an underscore (e.g. `_myplugin.py`)
All public classes with a name ending in `IE`/`PP` are imported from each file for extractors and postprocessors repectively. This respects underscore prefix (e.g. `_MyBasePluginIE` is private) and `__all__`. Modules can similarly be excluded by prefixing the module name with an underscore (e.g. `_myplugin.py`).
To replace an existing extractor with a subclass of one, set the `plugin_name` class keyword argument (e.g. `MyPluginIE(ABuiltInIE, plugin_name='myplugin')` will replace `ABuiltInIE` with `MyPluginIE`).
Due to the mechanics behind this, you should exclude the subclass extractor from being imported separately by making it private using one of the methods described above.
To replace an existing extractor with a subclass of one, set the `plugin_name` class keyword argument (e.g. `MyPluginIE(ABuiltInIE, plugin_name='myplugin')` will replace `ABuiltInIE` with `MyPluginIE`). Since the extractor replaces the parent, you should exclude the subclass extractor from being imported separately by making it private using one of the methods described above.
If you are a plugin author, add [yt-dlp-plugins](https://github.com/topics/yt-dlp-plugins) as a topic to your repository for discoverability
If you are a plugin author, add [yt-dlp-plugins](https://github.com/topics/yt-dlp-plugins) as a topic to your repository for discoverability.
See the [Developer Instructions](https://github.com/yt-dlp/yt-dlp/blob/master/CONTRIBUTING.md#developer-instructions) on how to write and test an extractor.
pukkandan
2 years ago