@ -195,7 +195,7 @@ After you have ensured this site is distributing its content legally, you can fo
# * A value
# * MD5 checksum; start the string with md5:
# * A regular expression; start the string with re:
# * Any Python type (for example int or float)
# * Any Python type, e.g. int or float
}
}]
@ -261,7 +261,7 @@ The aforementioned metafields are the critical data that the extraction does not
For pornographic sites, appropriate `age_limit` must also be returned.
The extractor is allowed to return the info dict without url or formats in some special cases if it allows the user to extract usefull information with `--ignore-no-formats-error` - Eg: when the video is a live stream that has not started yet.
The extractor is allowed to return the info dict without url or formats in some special cases if it allows the user to extract usefull information with `--ignore-no-formats-error` - e.g. when the video is a live stream that has not started yet.
[Any field](yt_dlp/extractor/common.py#219-L426) apart from the aforementioned ones are considered **optional**. That means that extraction should be **tolerant** to situations when sources for these fields can potentially be unavailable (even if they are always available at the moment) and **future-proof** in order not to break the extraction of general purpose mandatory fields.
--sponsorblock-remove CATS SponsorBlock categories to be removed from
@ -1140,7 +1140,7 @@ You can configure yt-dlp by placing any supported command line option to a confi
1. **System Configuration**: `/etc/yt-dlp.conf`
For example, with the following configuration file yt-dlp will always extract the audio, not copy the mtime, use a proxy and save all videos under `YouTube` directory in your home directory:
E.g. with the following configuration file yt-dlp will always extract the audio, not copy the mtime, use a proxy and save all videos under `YouTube` directory in your home directory:
```
# Lines starting with # are comments
@ -1178,7 +1178,7 @@ After that you can add credentials for an extractor in the following format, whe
@ -1197,32 +1197,32 @@ The `-o` option is used to indicate a template for the output file names while `
The simplest usage of `-o` is not to set any template arguments when downloading a single file, like in `yt-dlp -o funny_video.flv "https://some/video"` (hard-coding file extension like this is _not_ recommended and could break some post-processing).
It may however also contain special sequences that will be replaced when downloading each video. The special sequences may be formatted according to [Python string formatting operations](https://docs.python.org/3/library/stdtypes.html#printf-style-string-formatting). For example,`%(NAME)s` or `%(NAME)05d`. To clarify, that is a percent symbol followed by a name in parentheses, followed by formatting operations.
It may however also contain special sequences that will be replaced when downloading each video. The special sequences may be formatted according to [Python string formatting operations](https://docs.python.org/3/library/stdtypes.html#printf-style-string-formatting), e.g.`%(NAME)s` or `%(NAME)05d`. To clarify, that is a percent symbol followed by a name in parentheses, followed by formatting operations.
The field names themselves (the part inside the parenthesis) can also have some special formatting:
1. **Object traversal**: The dictionaries and lists available in metadata can be traversed by using a `.` (dot) separator. You can also do python slicing using `:`. Eg:`%(tags.0)s`, `%(subtitles.en.-1.ext)s`, `%(id.3:7:-1)s`, `%(formats.:.format_id)s`. `%()s` refers to the entire infodict. Note that all the fields that become available using this method are not listed below. Use `-j` to see such fields
1. **Object traversal**: The dictionaries and lists available in metadata can be traversed by using a `.` (dot) separator. You can also do python slicing using `:`. E.g.`%(tags.0)s`, `%(subtitles.en.-1.ext)s`, `%(id.3:7:-1)s`, `%(formats.:.format_id)s`. `%()s` refers to the entire infodict. Note that all the fields that become available using this method are not listed below. Use `-j` to see such fields
1. **Addition**: Addition and subtraction of numeric fields can be done using `+` and `-` respectively. Eg:`%(playlist_index+10)03d`, `%(n_entries+1-playlist_index)d`
1. **Addition**: Addition and subtraction of numeric fields can be done using `+` and `-` respectively. E.g.`%(playlist_index+10)03d`, `%(n_entries+1-playlist_index)d`
1. **Date/time Formatting**: Date/time fields can be formatted according to [strftime formatting](https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes) by specifying it separated from the field name using a `>`. Eg:`%(duration>%H-%M-%S)s`, `%(upload_date>%Y-%m-%d)s`, `%(epoch-3600>%H-%M-%S)s`
1. **Date/time Formatting**: Date/time fields can be formatted according to [strftime formatting](https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes) by specifying it separated from the field name using a `>`. E.g.`%(duration>%H-%M-%S)s`, `%(upload_date>%Y-%m-%d)s`, `%(epoch-3600>%H-%M-%S)s`
1. **Alternatives**: Alternate fields can be specified separated with a `,`. Eg:`%(release_date>%Y,upload_date>%Y|Unknown)s`
1. **Alternatives**: Alternate fields can be specified separated with a `,`. E.g.`%(release_date>%Y,upload_date>%Y|Unknown)s`
1. **Replacement**: A replacement value can specified using a `&` separator. If the field is *not* empty, this replacement value will be used instead of the actual field content. This is done after alternate fields are considered; thus the replacement is used if *any* of the alternative fields is *not* empty.
1. **Default**: A literal default value can be specified for when the field is empty using a `|` separator. This overrides `--output-na-template`. Eg:`%(uploader|Unknown)s`
1. **Default**: A literal default value can be specified for when the field is empty using a `|` separator. This overrides `--output-na-template`. E.g.`%(uploader|Unknown)s`
1. **More Conversions**: In addition to the normal format types `diouxXeEfFgGcrs`, yt-dlp additionally supports converting to `B` = **B**ytes, `j` = **j**son (flag `#` for pretty-printing), `h` = HTML escaping, `l` = a comma separated **l**ist (flag `#` for `\n` newline-separated), `q` = a string **q**uoted for the terminal (flag `#` to split a list into different arguments), `D` = add **D**ecimal suffixes (Eg: 10M) (flag `#` to use 1024 as factor), and `S` = **S**anitize as filename (flag `#` for restricted)
1. **More Conversions**: In addition to the normal format types `diouxXeEfFgGcrs`, yt-dlp additionally supports converting to `B` = **B**ytes, `j` = **j**son (flag `#` for pretty-printing), `h` = HTML escaping, `l` = a comma separated **l**ist (flag `#` for `\n` newline-separated), `q` = a string **q**uoted for the terminal (flag `#` to split a list into different arguments), `D` = add **D**ecimal suffixes (e.g. 10M) (flag `#` to use 1024 as factor), and `S` = **S**anitize as filename (flag `#` for restricted)
1. **Unicode normalization**: The format type `U` can be used for NFC [unicode normalization](https://docs.python.org/3/library/unicodedata.html#unicodedata.normalize). The alternate form flag (`#`) changes the normalization to NFD and the conversion flag `+` can be used for NFKC/NFKD compatibility equivalence normalization. Eg:`%(title)+.100U` is NFKC
1. **Unicode normalization**: The format type `U` can be used for NFC [unicode normalization](https://docs.python.org/3/library/unicodedata.html#unicodedata.normalize). The alternate form flag (`#`) changes the normalization to NFD and the conversion flag `+` can be used for NFKC/NFKD compatibility equivalence normalization. E.g.`%(title)+.100U` is NFKC
Additionally, you can set different output templates for the various metadata files separately from the general output template by specifying the type of file followed by the template separated by a colon `:`. The different file types supported are `subtitle`, `thumbnail`, `description`, `annotation` (deprecated), `infojson`, `link`, `pl_thumbnail`, `pl_description`, `pl_infojson`, `chapter`, `pl_video`. For example,`-o "%(title)s.%(ext)s" -o "thumbnail:%(title)s\%(title)s.%(ext)s"` will put the thumbnails in a folder with the same name as the video. If any of the templates is empty, that type of file will not be written. Eg:`--write-thumbnail -o "thumbnail:"` will write thumbnails only for playlists and not for video.
Additionally, you can set different output templates for the various metadata files separately from the general output template by specifying the type of file followed by the template separated by a colon `:`. The different file types supported are `subtitle`, `thumbnail`, `description`, `annotation` (deprecated), `infojson`, `link`, `pl_thumbnail`, `pl_description`, `pl_infojson`, `chapter`, `pl_video`. E.g.`-o "%(title)s.%(ext)s" -o "thumbnail:%(title)s\%(title)s.%(ext)s"` will put the thumbnails in a folder with the same name as the video. If any of the templates is empty, that type of file will not be written. E.g.`--write-thumbnail -o "thumbnail:"` will write thumbnails only for playlists and not for video.
The available fields are:
@ -1358,13 +1358,13 @@ Available only in `--sponsorblock-chapter-title`:
- `category_names` (list): Friendly names of the categories
- `name` (string): Friendly name of the smallest category
Each aforementioned sequence when referenced in an output template will be replaced by the actual value corresponding to the sequence name. For example for `-o %(title)s-%(id)s.%(ext)s` and an mp4 video with title `yt-dlp test video` and id `BaW_jenozKc`, this will result in a `yt-dlp test video-BaW_jenozKc.mp4` file created in the current directory.
Each aforementioned sequence when referenced in an output template will be replaced by the actual value corresponding to the sequence name. E.g. for `-o %(title)s-%(id)s.%(ext)s` and an mp4 video with title `yt-dlp test video` and id `BaW_jenozKc`, this will result in a `yt-dlp test video-BaW_jenozKc.mp4` file created in the current directory.
Note that some of the sequences are not guaranteed to be present since they depend on the metadata obtained by a particular extractor. Such sequences will be replaced with placeholder value provided with `--output-na-placeholder` (`NA` by default).
**Tip**: Look at the `-j` output to identify which fields are available for the particular URL
For numeric sequences you can use [numeric related formatting](https://docs.python.org/3/library/stdtypes.html#printf-style-string-formatting), for example,`%(view_count)05d` will result in a string with view count padded with zeros up to 5 characters, like in `00042`.
For numeric sequences you can use [numeric related formatting](https://docs.python.org/3/library/stdtypes.html#printf-style-string-formatting); e.g.`%(view_count)05d` will result in a string with view count padded with zeros up to 5 characters, like in `00042`.
Output templates can also contain arbitrary hierarchical path, e.g. `-o "%(playlist)s/%(playlist_index)s - %(title)s.%(ext)s"` which will result in downloading each video in a directory corresponding to this path template. Any missing directory will be automatically created for you.
@ -1434,7 +1434,7 @@ The general syntax for format selection is `-f FORMAT` (or `--format FORMAT`) wh
**tl;dr:** [navigate me to examples](#format-selection-examples).
<!-- MANPAGE: END EXCLUDED SECTION -->
The simplest case is requesting a specific format, for example with `-f 22` you can download the format with format code equal to 22. You can get the list of available format codes for particular video using `--list-formats` or `-F`. Note that these format codes are extractor specific.
The simplest case is requesting a specific format; e.g. with `-f 22` you can download the format with format code equal to 22. You can get the list of available format codes for particular video using `--list-formats` or `-F`. Note that these format codes are extractor specific.
You can also use a file extension (currently `3gp`, `aac`, `flv`, `m4a`, `mp3`, `mp4`, `ogg`, `wav`, `webm` are supported) to download the best quality format of a particular file extension served as a single file, e.g. `-f webm` will download the best quality format with the `webm` extension served as a single file.
@ -1461,15 +1461,15 @@ For example, to download the worst quality video-only format you can use `-f wor
You can select the n'th best format of a type by using `best<type>.<n>`. For example, `best.2` will select the 2nd best combined format. Similarly, `bv*.3` will select the 3rd best format that contains a video stream.
If you want to download multiple videos and they don't have the same formats available, you can specify the order of preference using slashes. Note that formats on the left hand side are preferred, for example`-f 22/17/18` will download format 22 if it's available, otherwise it will download format 17 if it's available, otherwise it will download format 18 if it's available, otherwise it will complain that no suitable formats are available for download.
If you want to download multiple videos and they don't have the same formats available, you can specify the order of preference using slashes. Note that formats on the left hand side are preferred; e.g.`-f 22/17/18` will download format 22 if it's available, otherwise it will download format 17 if it's available, otherwise it will download format 18 if it's available, otherwise it will complain that no suitable formats are available for download.
If you want to download several formats of the same video use a comma as a separator, e.g. `-f 22,17,18` will download all these three formats, of course if they are available. Or a more sophisticated example combined with the precedence feature: `-f 136/137/mp4/bestvideo,140/m4a/bestaudio`.
You can merge the video and audio of multiple formats into a single file using `-f <format1>+<format2>+...` (requires ffmpeg installed), for example`-f bestvideo+bestaudio` will download the best video-only format, the best audio-only format and mux them together with ffmpeg.
You can merge the video and audio of multiple formats into a single file using `-f <format1>+<format2>+...` (requires ffmpeg installed); e.g.`-f bestvideo+bestaudio` will download the best video-only format, the best audio-only format and mux them together with ffmpeg.
**Deprecation warning**: Since the *below* described behavior is complex and counter-intuitive, this will be removed and multistreams will be enabled by default in the future. A new operator will be instead added to limit formats to single audio/video
Unless `--video-multistreams` is used, all formats with a video stream except the first one are ignored. Similarly, unless `--audio-multistreams` is used, all formats with an audio stream except the first one are ignored. For example,`-f bestvideo+best+bestaudio --video-multistreams --audio-multistreams` will download and merge all 3 given formats. The resulting file will have 2 video streams and 2 audio streams. But `-f bestvideo+best+bestaudio --no-video-multistreams` will download and merge only `bestvideo` and `bestaudio`. `best` is ignored since another format containing a video stream (`bestvideo`) has already been selected. The order of the formats is therefore important. `-f best+bestaudio --no-audio-multistreams` will download and merge both formats while `-f bestaudio+best --no-audio-multistreams` will ignore `best` and download only `bestaudio`.
Unless `--video-multistreams` is used, all formats with a video stream except the first one are ignored. Similarly, unless `--audio-multistreams` is used, all formats with an audio stream except the first one are ignored. E.g.`-f bestvideo+best+bestaudio --video-multistreams --audio-multistreams` will download and merge all 3 given formats. The resulting file will have 2 video streams and 2 audio streams. But `-f bestvideo+best+bestaudio --no-video-multistreams` will download and merge only `bestvideo` and `bestaudio`. `best` is ignored since another format containing a video stream (`bestvideo`) has already been selected. The order of the formats is therefore important. `-f best+bestaudio --no-audio-multistreams` will download and merge both formats while `-f bestaudio+best --no-audio-multistreams` will ignore `best` and download only `bestaudio`.
## Filtering Formats
@ -1500,9 +1500,9 @@ Any string comparison may be prefixed with negation `!` in order to produce an o
Note that none of the aforementioned meta fields are guaranteed to be present since this solely depends on the metadata obtained by particular extractor, i.e. the metadata offered by the website. Any other field made available by the extractor can also be used for filtering.
Formats for which the value is not known are excluded unless you put a question mark (`?`) after the operator. You can combine format filters, so `-f "[height<=?720][tbr>500]"` selects up to 720p videos (or videos where the height is not known) with a bitrate of at least 500 KBit/s. You can also use the filters with `all` to download all formats that satisfy the filter. For example,`-f "all[vcodec=none]"` selects all audio-only formats.
Formats for which the value is not known are excluded unless you put a question mark (`?`) after the operator. You can combine format filters, so `-f "[height<=?720][tbr>500]"` selects up to 720p videos (or videos where the height is not known) with a bitrate of at least 500 KBit/s. You can also use the filters with `all` to download all formats that satisfy the filter, e.g.`-f "all[vcodec=none]"` selects all audio-only formats.
Format selectors can also be grouped using parentheses, for example if you want to download the best pre-merged mp4 and webm formats with a height lower than 480 you can use `-f "(mp4,webm)[height<480]"`.
Format selectors can also be grouped using parentheses; e.g. `-f "(mp4,webm)[height<480]"` will download the best pre-merged mp4 and webm formats with a height lower than 480.
## Sorting Formats
@ -1540,7 +1540,7 @@ The available fields are:
**Deprecation warning**: Many of these fields have (currently undocumented) aliases, that may be removed in a future version. It is recommended to use only the documented field names.
All fields, unless specified otherwise, are sorted in descending order. To reverse this, prefix the field with a `+`. Eg:`+res` prefers format with the smallest resolution. Additionally, you can suffix a preferred value for the fields, separated by a `:`. Eg:`res:720` prefers larger videos, but no larger than 720p and the smallest video if there are no videos less than 720p. For `codec` and `ext`, you can provide two preferred values, the first for video and the second for audio. Eg:`+codec:avc:m4a` (equivalent to `+vcodec:avc,+acodec:m4a`) sets the video codec preference to `h264` > `h265` > `vp9` > `vp9.2` > `av01` > `vp8` > `h263` > `theora` and audio codec preference to `mp4a` > `aac` > `vorbis` > `opus` > `mp3` > `ac3` > `dts`. You can also make the sorting prefer the nearest values to the provided by using `~` as the delimiter. Eg:`filesize~1G` prefers the format with filesize closest to 1 GiB.
All fields, unless specified otherwise, are sorted in descending order. To reverse this, prefix the field with a `+`. E.g.`+res` prefers format with the smallest resolution. Additionally, you can suffix a preferred value for the fields, separated by a `:`. E.g.`res:720` prefers larger videos, but no larger than 720p and the smallest video if there are no videos less than 720p. For `codec` and `ext`, you can provide two preferred values, the first for video and the second for audio. E.g.`+codec:avc:m4a` (equivalent to `+vcodec:avc,+acodec:m4a`) sets the video codec preference to `h264` > `h265` > `vp9` > `vp9.2` > `av01` > `vp8` > `h263` > `theora` and audio codec preference to `mp4a` > `aac` > `vorbis` > `opus` > `mp3` > `ac3` > `dts`. You can also make the sorting prefer the nearest values to the provided by using `~` as the delimiter. E.g.`filesize~1G` prefers the format with filesize closest to 1 GiB.
The fields `hasvid` and `ie_pref` are always given highest priority in sorting, irrespective of the user-defined order. This behaviour can be changed by using `--format-sort-force`. Apart from these, the default order used is: `lang,quality,res,fps,hdr:12,vcodec:vp9.2,channels,acodec,size,br,asr,proto,ext,hasaud,source,id`. The extractors may override this default order, but they cannot override the user-provided order.
@ -1685,9 +1685,9 @@ Note that any field created by this can be used in the [output template](#output
This option also has a few special uses:
* You can download an additional URL based on the metadata of the currently downloaded video. To do this, set the field `additional_urls` to the URL that you want to download. Eg:`--parse-metadata "description:(?P<additional_urls>https?://www\.vimeo\.com/\d+)` will download the first vimeo video found in the description
* You can download an additional URL based on the metadata of the currently downloaded video. To do this, set the field `additional_urls` to the URL that you want to download. E.g.`--parse-metadata "description:(?P<additional_urls>https?://www\.vimeo\.com/\d+)` will download the first vimeo video found in the description
* You can use this to change the metadata that is embedded in the media file. To do this, set the value of the corresponding field with a `meta_` prefix. For example, any value you set to `meta_description` field will be added to the `description` field in the file. For example, you can use this to set a different "description" and "synopsis". To modify the metadata of individual streams, use the `meta<n>_` prefix (Eg:`meta1_language`). Any value set to the `meta_` field will overwrite all default values.
* You can use this to change the metadata that is embedded in the media file. To do this, set the value of the corresponding field with a `meta_` prefix. For example, any value you set to `meta_description` field will be added to the `description` field in the file - you can use this to set a different "description" and "synopsis". To modify the metadata of individual streams, use the `meta<n>_` prefix (e.g.`meta1_language`). Any value set to the `meta_` field will overwrite all default values.
**Note**: Metadata modification happens before format selection, post-extraction and other post-processing operations. Some fields may be added or changed during these steps, overriding your changes.
Some extractors accept additional arguments which can be passed using `--extractor-args KEY:ARGS`. `ARGS` is a `;` (semicolon) separated string of `ARG=VAL1,VAL2`. Eg:`--extractor-args "youtube:player-client=android_embedded,web;include_live_dash" --extractor-args "funimation:version=uncut"`
Some extractors accept additional arguments which can be passed using `--extractor-args KEY:ARGS`. `ARGS` is a `;` (semicolon) separated string of `ARG=VAL1,VAL2`. E.g.`--extractor-args "youtube:player-client=android_embedded,web;include_live_dash" --extractor-args "funimation:version=uncut"`
The following extractors use this feature:
#### youtube
* `skip`: One or more of `hls`, `dash` or `translated_subs` to skip extraction of the m3u8 manifests, dash manifests and [auto-translated subtitles](https://github.com/yt-dlp/yt-dlp/issues/4090#issuecomment-1158102032) respectively
* `player_client`: Clients to extract video data from. The main clients are `web`, `android` and `ios` with variants `_music`, `_embedded`, `_embedscreen`, `_creator` (Eg:`web_embedded`); and `mweb` and `tv_embedded` (agegate bypass) with no variants. By default, `android,web` is used, but `tv_embedded` and `creator` variants are added as required for age-gated videos. Similarly the music variants are added for `music.youtube.com` urls. You can use `all` to use all the clients, and `default` for the default clients.
* `player_client`: Clients to extract video data from. The main clients are `web`, `android` and `ios` with variants `_music`, `_embedded`, `_embedscreen`, `_creator` (e.g.`web_embedded`); and `mweb` and `tv_embedded` (agegate bypass) with no variants. By default, `android,web` is used, but `tv_embedded` and `creator` variants are added as required for age-gated videos. Similarly the music variants are added for `music.youtube.com` urls. You can use `all` to use all the clients, and `default` for the default clients.
* `player_skip`: Skip some network requests that are generally needed for robust extraction. One or more of `configs` (skip client configs), `webpage` (skip initial webpage), `js` (skip js player). While these options can help reduce the number of requests needed or avoid some rate-limiting, they could cause some issues. See [#860](https://github.com/yt-dlp/yt-dlp/pull/860) for more details
* `include_live_dash`: Include live dash formats even without `--live-from-start` (These formats don't download properly)
* `comment_sort`: `top` or `new` (default) - choose comment sorting mode (on YouTube's side)
* `max_comments`: Limit the amount of comments to gather. Comma-separated list of integers representing `max-comments,max-parents,max-replies,max-replies-per-thread`. Default is `all,all,all,all`
* E.g. `all,all,1000,10` will get a maximum of 1000 replies total, with up to 10 replies per thread. `1000,all,100` will get a maximum of 1000 comments, with a maximum of 100 replies total
* `innertube_host`: Innertube API host to use for all API requests
* e.g. `studio.youtube.com`, `youtubei.googleapis.com`
* E.g. `studio.youtube.com`, `youtubei.googleapis.com`
* Note: Cookies exported from `www.youtube.com` will not work with hosts other than `*.youtube.com`
* `innertube_key`: Innertube API key to use for all API requests
@ -1768,17 +1768,16 @@ The following extractors use this feature:
* `approximate_date`: Extract approximate `upload_date` in flat-playlist. This may cause date-based filters to be slightly off
#### funimation
* `language`: Languages to extract. Eg:`funimation:language=english,japanese`
* `language`: Languages to extract, e.g.`funimation:language=english,japanese`
* `version`: The video version to extract - `uncut` or `simulcast`
#### crunchyroll
* `language`: Languages to extract. Eg:`crunchyroll:language=jaJp`
* `hardsub`: Which hard-sub versions to extract. Eg:`crunchyroll:hardsub=None,enUS`
* `language`: Languages to extract, e.g.`crunchyroll:language=jaJp`
* `hardsub`: Which hard-sub versions to extract, e.g.`crunchyroll:hardsub=None,enUS`
#### crunchyrollbeta
* `format`: Which stream type(s) to extract. Default is `adaptive_hls` Eg: `crunchyrollbeta:format=vo_adaptive_hls`
Lesmiscore
2 years ago
committed by
GitHub